Many people own Apple products since they are not only known for being good looking, but they are also assured of quality and long term support, despite their hefty price tag in many countries. People, who own it, know the value of using one and once you buy an Apple product, you become a lifelong fan, half because you paid your full pay check on it. But when you own something so nice, you want it to be different from many people who own something similar to what you have. What if you could light up the Apple logo on the back of the iPhone like it does on a Mac book when you turn it on? Just follow the instructions below and watch the video in the last slide and perform the trick yourself. Also read the disclaimer above.
1 Things you will need
First of all again it would be pointed out, that before going further, kindly check the model of your iPhone and if it is not 6 or 6s, kindly do not read this further. First of all you require an LED light kit which has a light strip, some tape, insulation material and a handy tool kit. You can get it online from most ecommerce sites.
2 Initial steps
The first and most important step is to backup your data using iTunes or the iCloud facilities. This will help you get your data back in case something unwanted happens to your phone. Now switch off the phone to keep it from getting corrupt during the entire process.
Now you need to remove the two screws as seen in the image from the bottom of the phone and you can use the pentalobe screwdriver provided in the tool kit for doing so easily. Do keep the screws in a safe place after removing them, as you need to screw them back in and these are not found easily in market if you lose them.
After removing the screws from the bottom, use the suction cup provided in the tool kit and sticks it on the screen of the phone. Now be gentle and pull the screen up using the suction cup and separate it from the base of the phone using the pry tool. Take care not to break or crack the screen, that’s another few hundred bucks in repairs. Click on next for further instructions.
3 Secondary steps
After doing so, remove the silver plate and the connectors from the base to fully remove the screen. Be very cautious in doing this and take your time. After this, use the pry tool and insert it in the area shown in the image and remove the connectors from here and remove the battery of the phone. Again be careful.
Now you will see a tape stuck on the screen, remove it to uncover three metal connectors as shown in the image.
You need to use the screwdriver and peel off this silver layer as shown in the image very slowly and keep it aside safely. Care not to damage the layer and use it later.
4 Finishing touches
Now for the finishing touches, take the LED from the kit and stick it on the space where Apple logo is and connect the connectors on the strip to the bottom three ones. Now put in the battery and go in reverse on all steps and put everything back together. You can use the video in this slide as a guide and see if you have done everything correctly. Once everything is back on, switch on the phone and see magic happening on the back of the phone, as the Apple logo lights up.
Disclaimer: kindly perform this trick on your own risk. If the iPhone gets damaged in any way, we are not responsible. Follow the instructions in the video to perform this task successfully. This trick only works for owners of iPhone 6 and 6s. Older models users do not try this trick.
What are your thoughts? Please comment below and share this news!